Toshiba RemotEye 4 User Manual

RemotEye 4 User Manual – 90988-007 47
6 PROTOCOL SETUP
SNMP SETUP
To configure the RemotEye 4 for a SNMP network
1. Click on the SETTINGS menu header (Figure 5-15), then click on “SNMP Settings” in the drop-down
menu.
2. Fill in the SNMP settings in the SNMP Settings panel. For SNMP Traps, select the appropriate settings under
SNMP TRAP Receivers by entering the IP address etc. and selecting from the corresponding drop-down
menus for Trap, Severity Level, and Version.
3. Click the Set button.
Figure 6-1 SNMP Settings Panel
The RemotEye 4 supports SNMP ver. 1, ver. 2c, and ver. 3. Any workstation with compat1ble SNMP management
software can manage/monitor a Toshiba UPS through RemotEye 4.

Toshiba RemotEye 4 Specifications

General

Brand	Toshiba
Model	RemotEye 4
Category	Network Card
Language	English