Vanderbilt bright blue User Manual

VBBIM09/33/20 v5.0.3
Chapter 7 VRI-1 119
Addressing
J2 on the VRI-1 consists of eight sets of jumpers that can be combined to set the address for the device, RS-485
communications baud rate and enable encryption. Record the jumper configured address of the VRI-1 and which
channel it is connected to on the bright blue controller. This information will be required to set up the reader in
bright blue.

Vanderbilt bright blue Specifications

General

Brand	Vanderbilt
Model	bright blue
Category	Security Sensors
Language	English