Vanderbilt bright blue User Manual

82 bright blue Installation Manual
f) Make a note of the IP Address, it will be used by the bright blue interface to configure the VBB-NRI.
5 Exit the Discovery and Configuration program.
The DHCP address of the VBB-NRI has been set.
Note: The DHCP address can also be set using the Configuration GUI. Follow the directions above for Static IP
but select the DHCP configuration option and then use the Discovery and Configuration tool to find the IP address.
Configuration GUI (Graphic User Interface)
Hostname - This displays the name of the specific VBB-NRI board. The default name should not be changed.
The name is in a standard format of SRI-01-XXX.
▪ SRI - Smart Reader Interface
▪ 01 - The designation for an VBB-NRI
▪ XXX - The serial number of the specific VBB-NRI (in the above example the serial number is 975).

Vanderbilt bright blue Specifications

General

Brand	Vanderbilt
Model	bright blue
Category	Security Sensors
Language	English