Vanderbilt bright blue User Manual

VBBIM09/33/20 v5.0.3
Chapter 5 VBB-NRI 87
Connecting to bright blue
There is no direct connection between the VBB-NRI and bright blue. They need to be on the same network and
the proper IP address of the VBB-NRI needs to be entered when setting up the door (see the VBB-NRI IP
Configuration section for details) for them to communicate. In addition, a data surge protector needs to be installed
between bright blue and the hub or switch. Install the supplied data surge protector (DITEK-DTK-MRJ45C5E) or
an equivalent UL Listed unit. Power is supplied independently from a power supply connecting to P1 on the VBB-
NRI.
Data Communication between bright blue and VBB-NRI
bright blue
VBB-NRI
Power Supply
Ethernet To Network
Ethernet to Network
Pin 1 - PWR (Power)
+ (Power)
Pin 4 - GND (Ground)
- (Ground)

Vanderbilt bright blue Specifications

General

Brand	Vanderbilt
Model	bright blue
Category	Security Sensors
Language	English