Vanderbilt bright blue User Manual

80 bright blue Installation Manual
The Static IP address of the VBB-NRI has been set.
Note: The Static IP address can also be set using the Discovery and Configuration Tool. Follow the directions
below for DHCP but select the Static IP configuration option and manually enter the IP address and Subnet mask.
DHCP Configuration
Configuring the VBB-NRI to DHCP requires the Discovery and Configuration program (located on the CD that is
included with bright blue).
To configure the VBB-NRI with the Discovery and Configuration tool:
1 Connect the PC running the Discovery and Configuration tool to the VBB-NRI.
▪ Direct Connection - Using a cross-over cable, the VBB-NRI can be connected directly to the network
card of the PC.
▪ Network Connection - Using a regular network cable, the VBB-NRI can be connected to a hub or switch
that is on the same network as the PC.
2 Run the Discovery and Configuration tool.

Vanderbilt bright blue Specifications

General

Brand	Vanderbilt
Model	bright blue
Category	Security Sensors
Language	English