Highlights
▪ Supports various read head technologies; Proximity, (Wiegand Format) and Magnetic Stripe (not evaluated
by UL)
▪ Standard 26-bit
▪ Vanderbilt 34-bit
▪ Xceed-ID XF1050 Reader
▪ HID Corporate 1000 35-bit (not evaluated by UL)
▪ HID Corporate 1000 48-bit (not evaluated by UL)
▪ HID/ProxIF 37-Bit
▪ XceedID 40-Bit
▪ Vanderbilt 35-bit (including EV1)
▪ MiFare 32-Bit Serial Number
▪ Communicates via RS-485 protocol
▪ Powered directly from bright blue
▪ OPTIONAL - can be powered locally by a UL294 Listed Power-Limited, Power Supply capable of 4 hours
standby power.
Standard Features
▪ Supports one read-head credential
▪ Connects directly to the communication channels on the bright blue controller via RS-485 protocol
▪ Includes Two 2 amp, form C, single pole/double throw, mechanically latching relay
▪ Connection for one multi-color LED for access granted or access denied indication
▪ Includes 4 input contacts for devices such as exit request (REX), door position switch (DOD), etc.
Specifications
▪ Board Dimensions - 3-13/16” x 3-13/16” x 1-3/4”D
▪ Enclosure Dimensions - 8-1/4”H x 7-1/2W” x 3-1/2”D
▪ Power requirements - 12 to 24 VDC (supplied by bright blue controller)
▪ Power consumption - 300mA max. (with reader)
▪ Ambient temperature - 0º to 49º C or 32º to 120º F
SBB-RI Enclosure
SBB-RI Enclosure - An enclosure with a hinged door is included for each SBB-RI. The flying leads of the
tamper switch should be attached to a UL Listed burglar alarm system or Listed local siren/annunicator.
Features
▪ Metal enclosure with hinged door
▪ Enclosure Dimensions: 8.25” x 7.5” x 3.5”
To Next Page
Need help?
General
