Vanderbilt bright blue User Manual

58 bright blue Installation Manual
Highlights
▪ Supports various read head technologies; Proximity (Wiegand Format) and Magnetic Stripe (not evaluated
by UL)
▪ Standard 26-bit
▪ Vanderbilt 34-bit
▪ Xceed-ID XF1050 Reader
▪ HID Corporate 1000 35-bit (not evaluated by UL)
▪ HID Corporate 1000 48-bit (not evaluated by UL)
▪ HID/ProxIF 37-Bit
▪ XceedID 40-Bit
▪ Vanderbilt 35-bit (including EV1)
▪ MiFare 32-Bit Serial Number
▪ Embedded directly on bright blue Vanderbilt AP02 Controller
▪ Powered directly from bright blue
Features
▪ Supports one read-head attached to each reader interface
▪ Mounted directly on the bright blue Vanderbilt AP02 Controller
▪ Includes Two 2 amp, form C, single pole/double throw, mechanically latching relays total
▪ Connection for one multi-color LED for access granted or access denied indication for each read-head
▪ Includes 4 input contacts for devices such as exit request (REX), door position switch (DOD), etc. total
Specifications
▪ Power requirements: supplied by bright blue Controller
▪ Power consumption: 485mA @ 12 – 24 VDC, 260 mA Max without Onboard Readers
▪ Ambient temperature: -40º to 55º C
VBB-OBRI Supports 2 Configurations:
VBB-OBRI Single Reader Interface = 4 Contacts and 2 Relays / Reader (Max 1 Door)
VBB-OBRI Dual Reader Interface = 2 Contacts and 1 Relay / Reader (Max 2 Doors)
See VBB-OBRI PIN Functions Below

Vanderbilt bright blue Specifications

General

Brand	Vanderbilt
Model	bright blue
Category	Security Sensors
Language	English