EasyManuals Logo
Home>Vanderbilt>Security Sensors>bright blue

Vanderbilt bright blue User Manual

Vanderbilt bright blue
242 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #195 background imageLoading...
Page #195 background image
194 bright blue Installation Manual
Operational environment
▪ Temperature: 32 – 120 °F (0 – 49 °C)
▪ Humidity: 0 – 100% (non-condensing)
â–ª Power: 12 VDC @ 330 mA; 24 VDC @ 100 mA or 802.3af/at PoE @ 60 mA
(cannot be powered from VRCNX-M/R)
Specifications for the GWE – ENGAGE Gateway
â–ª 2.4 GHz Bluetooth v4.0
â–ª Spread spectrum
â–ª Dynamic channel switching (40 channels)
▪ Range: Up to 100’ with obstructions (normal building construction), up to 200’ clear line of site
â–ª Gateway to Lock Encryption: AES 256-bit
â–ª Certifications: UL294, FCC Part 15, Industry Canada (IC), RoHS
â–ª RS-485 Communication to VRCNX-M or VRCNX-R
â–ª Supports 10 NDE Wireless Devices
â–ª VRCNX-M/R can support multiple GWE - ENGAGE
LE Series Wireless Locks
Schlage LE Series locks contain all of the elements needed to electronically control and monitor access through a
door wirelessly. The lock includes a lockset, a Request-to-Exit sensor/switch, a power supply (battery pack),
terminals for monitoring a clutch position switch/sensor, a card reader and a RF transceiver for communicating
with a GWE – ENGAGE Gateway or smart phone (for configuration only). The GWE – ENGAGE Gateway
interfaces to the bright blue reader controller via wired RS-485.
Performance
â–ª Credential verification time: <= 1 second including lock actuation time but not including latency time of host
when paired with a GWE – ENGAGE Gateway
â–ª Wake Up on Radio - Allows the GWE - ENGAGE to alert the NDE locks in case of a Lock-out event.
Responds to command from SMS within 5 seconds when lined to GWE – ENGAGE Gateway.
â–ª Addressing
▪ Bluetooth Low Energy v4.0 when used with GWE – ENGAGE Gateway
â–ª Range: up to 100 feet on one floor when used in normal office interior construction
Mechanical Specifications
â–ª ANSI / BHMA A156.25-2013 (Indoor / Outdoor)
â–ª ANSI / BHMA A156.2-2011, Series 4000, Grade 1
â–ª Power: 4 AA alkaline batteries
â–ª Battery Life: up to 2 years (indoor application, 13.56 MHz CSN credential, 100 actuations daily)
Operating voltage
â–ª The 4 AA batteries will supply 6.2 volts.
â–ª The locks will continue to operate down to 4.5 volts when Low Battery will be reported.
â–ª The locks will report Critical Batter at 4.0 volts and into a fail-safe, fail secure or fail as-is mode
depending on lock configuration via ENGAGE mobile app.
Operational environment
▪ Temperature: -35°C to +66°C
â–ª Humidity: 0% to 100% non-condensing

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Vanderbilt bright blue and is the answer not in the manual?

Vanderbilt bright blue Specifications

General IconGeneral
BrandVanderbilt
Modelbright blue
CategorySecurity Sensors
LanguageEnglish

Related product manuals