Problem Solving
Xerox 700 Digital Color Press User Guide8-24
Cause: Unable to process job template due to insufficient hard disk
space.
Remedy: Remove unnecessary data from the hard disk to increase
free disk space.
Fault Codes
Cause/RemedyCode
If an error caused the printing to end
abnormally, or a malfunction occurred in the
machine, then an error code is displayed.
If an error code appears that is not listed in the
table below, or if an error persists after following
the listed solution, then contact your Xerox
Customer Support Center.
If an error code is displayed, all print data of the
machine as well as print data stored in the
machine's built-in memory is discarded.
Cause:
Unable to store any documents with 2 Sided Book Copy feature.
Remedy: Check the 2 Sided Book Copy settings.
Cause: The machine is unable to process size, because the specified
document area is too small.
Remedy: Increase resolution or scan area size.
Cause: When setting a mixed size document to Full Color/2 Side and
attempting to scan at 600dpi, an error occurs.
Remedy: Decrease [Scan Resolution] to [400dpi] or less, and rescan.
Cause: When scanning a mixed size document using the 2 sided
simultaneous scan feature with 300, 400, or 600dpi, an error occurs.
Remedy: Decrease [Scan Resolution] to [200dpi] or less, and rescan.
US:1-800-821-2797 (Includes TTY Support)
Canada:1-800-939-3769
To Next Page
Loading...
Need help?
General