Xerox 700 Digital Color Press User Guide3-18
Paper
Cover stock is ideal for posters, calendars,
report covers and presentation proofs.
Covers should be loaded in the Bypass
Tray face up.
Be sure to use the Paper Tray Settings
screen to specify the appropriate media
type.
Load labels face up into the Bypass Tray,
or face down into any other tray.
Do not fan the label sheets before use
unless the package instructs you to do so.
If jamming or multi-sheet feeding occurs
shuffle the labels before loading.
Labels consist of three layers; the face
sheet, pressure sensitive adhesive and the
backing or release sheet. When printing
self adhesive labels, it is best to use stock
designed for use in xerographic printers.
The adhesives are designed to withstand
the higher temperatures of such machines
without bleeding and causing spotting or
causing damage to the internal
components.
Dry gum labels (those that require
moistening before being applied) can
cause dry particles of glue to detach from
the backing and should not be used.
The label stock should be left in the printing
environment for 72 hours before using it in
the printer to allow it to adjust to the
ambient temperature.
Leave labels sealed in their plastic
wrapping until they are loaded in the
printer.
To Next Page
Loading...
Need help?
General