Xerox 700 User Manual

Xerox 700 Digital Color Press User Guide
Accessories
10-15
Auto Decurler
In Auto Decurler mode, appropriate decurl settings
are selected from the Tools Mode on the UI by:
1. Logging on as Administrator
2. Pressing the Machine Status button.
3. Selecting the Tools tab
4. Selecting System Settings/Common Service
Preset Decurler settings
Manual Decurler
The Manual Decurler mode has seven levels of curl
correction available at the Interface Module Control
Panel:
Three levels of Up-curl correction
Three levels of Down-curl correction, and•
A No correction level.•
The amount of curl correction is changed by
selecting a related button. The current selected
amount of curl correction is displayed by the Control
Panel LEDs.
Your system is also designed with several
automated presettings for controlling paper curl.
When using these settings, the machine
automatically sets the amount of curl correction at
the Decurler. Therefore, if paper curl is a problem,
use one of the preset Decurler settings in order to
eliminate the problem.
When the media passes through the decurler, you
are notified of the current amount of curl correction
by-way-of the various LEDs on the Interface Module
Control Panel. In addition to Auto Decurler mode,
you can manually select curl correction from the
Interface Module Control Panel.

Xerox 700 Specifications

General

Brand	Xerox
Model	700
Category	Printer
Language	English