Xerox 700 User Manual

Accessories
Xerox 700 Digital Color Press User Guide10-12
If power is interrupted to the HCS:
Ensure the power cord is plugged in to the •
proper wall receptacle
Ensure that the machine power is switched •
“On”
Ensure that the Ground Fault Indicator is in •
the "On" position
If the power has not been restored by •
checking the above items, then call for
service
Loss of power
Stacker Tray will accept 64-280 g/m2 (either •
coated or uncoated stock) with the possibility
of degraded stock quality and increased jam
rate
Transparencies may be run to either the Top •
Tray or the Stack Tray. Stack height should
be limited to 100 transparencies.
Coated paper lighter than 100 g/m2 may not •
run as reliably as coated paper heavier than
100 g/m2.
Non-standard papers longer than 305 mm •
(12") in the feed direction require 210 mm
(8.3") minimum measurement across the
feed direction.
Non-standard papers shorter than 254 mm •
(10”) in the cross-feed direction require 330
mm (13”) minimum measurement in the feed
direction.
Paper guidelines
Specifications
100V to 240V
Electrical
10 to 32°C, 15 to 85RH
50 to 90°F, 15 to 85RH
NOTE: Above 82°F (28°C), reduced humidity is
required to maintain the specified performance.
Temperature and humidity

Xerox 700 Specifications

General

Brand	Xerox
Model	700
Category	Printer
Language	English