Xerox VersaLink C620 User Manual

5. Load envelopes in the tray. For envelopes with the flap on a long edge, load envelopes with the flaps face down
and closed. Keep the flaps toward the right.
6. Move the width paper guides from the edges of the tray to fit the envelops.
7. Slide the tray back into the printer.
8. At the control panel, select the correct paper size, type, and color. Ensure that the paper type is set to Envelope.
Note: To change the paper settings when the tray is set to Dedicated mode, refer to Configuring Dedicated
Paper Trays.
9. To confirm the settings, touch CCoonnffiirrmm.
10. To return to the Home screen, press the HHoommee button.
Loading Envelopes in the Bypass Tray
For supported envelope sizes, refer to Supported Paper.
To load envelopes in the Bypass Tray, do the following:
1. To open the Bypass Tray, push the release latch (1) at the front-right side of Tray 1. If the tray is loaded with
paper, remove any paper that is a different size or type.
Note: For larger paper sizes, pull out the extension tray.
154 Xerox
®
VersaLink
®
C620 Color Printer User Guide
Paper and Media

Xerox VersaLink C620 Specifications

General

Brand	Xerox
Model	VersaLink C620
Category	Printer
Language	English