Copy
Xerox
®
WorkCentre
®
5022/5024 Multifunction Printer
User Guide
5-14
2. Select the desired setting as needed.
Lighten/Darken
You can set the density from five levels. The farther left the position of , the darker the copy; the
farther right, the lighter and toner saver mode.
1. Press the Lighten/Darken button.
2. Brightness level and Toner Saver changes every time the Lighten/Darken button is pressed. The
selection is applied when the screen returns to the main menu screen without pressing the OK
button.
You can change the displayed time length of the setting screen.
For more information on changing the displayed time length of the setting screen, refer to Quick-
Button Selection Timer on page 10-12.
Dark +2 Creates copies with the darkest density. Use this setting to scan
documents containing light objects.
Dark +1 Creates copies with a fairly dark density. Use this setting to scan
documents containing fairly light objects.
Normal Creates copies with the same density as the document.
Light +1 Creates copies with a fairly light density. Use this setting to scan
documents containing fairly dark objects.
Paper Supply
...
Copy
Auto
Reduce/Enlarge
...
Off
Pages per Side
...
Auto
1
111