Scan
Xerox
®
WorkCentre
®
5022/5024 Multifunction Printer
User Guide
7-16
Lighten/Darken
You can set the density from the five levels. The farther left the position of , the darker the copy
density is; the farther right, the lighter.
1. Press the Lighten/Darken button.
2. The selection of the brightness level changes everytime the Lighten/Darken button is pressed.
The selection is applied when the screen is returned to the main menu screen without pressing the
OK button.
You can change the displayed time length of the setting screen.
For more information on changing the displayed time length of the setting screen, refer to Quick-
Button Selection Timer on page 10-12.
Darken +2 Scans with the darkest density. Use this setting to scan document containing light
objects.
Darken +1 Scans with a fairly dark density. Use this setting to scan document containing fairly
light objects.
Normal Scans with the same density as document.
Lighten +1 Scans with a fairly light density. Use this setting to scan document containing fairly
dark objects.
Lighten +2 Scans with the lightest density. Use this setting to scan document containing dark
objects.
Lighten/Darken
Lighten/Darken
...
Darken Normal Lighten