Appendix
Xerox
®
WorkCentre
®
5022/5024 Multifunction Printer
User Guide
14-13
• Colors may appear muted on the underside of high-density images in printing in low-temperature,
low-humidity environments.
• Small white spots may appear within images on the back side of the paper in printing in low-
humidity environments.
Document Feeder
The machine does not detect a document placed in the document feeder during Sleep mode.
Notes and Restrictions on the Use of the Copy Feature
Copy Feature
The machine does not offer the Improves Fit function.
ID Card Copy
The front and back side of the placed ID card are printed on each half sheet of a paper in center except
the following cases:
• When the size of the ID card is larger than the standard printable size of the ID Card Copy feature,
the image is not printed in center.
• When the size of ID card is larger than the standard printable size of the ID Card Copy feature, a
part of the image may be cut off.
• The edges of the ID card may be cut off due to the edge erase.
About Memory
If the machine’s memory capacity becomes insufficient when copying using the collate feature, it
outputs only the document data which is being scanned.
Notes and Restrictions on the Use of the Print Feature
Output of Long Feed Documents
The output of long feed documents is not supported.
Print Jobs while the Control Panel is being Operated
The processing print job or output speed may be reduced in the following cases:
• When the control panel is operated during print job execution
• When the print job's status is displayed in the Job Status screen
• Even if the print driver is configured to skip blank pages, the blank pages with white characters,
newline characters and space characters will be printed.
When the print results differ from the settings
As in the following cases, insufficient memory for the print page buffer may cause print result in not
printing as specified.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
