Too ls
Xerox
®
WorkCentre
®
5022/5024 Multifunction Printer
User Guide
9-32
Scan Settings
Used to set the functions for the Scan feature.
The following settings are available for the Scan to E-mail and Scan to PC (Network) functions. For the
TWAIN and Windows Imaging Acquisition (WIA) application settings, the settings that you specify
with the application are applied.
For information on how to display the Scan Settings screen, refer to System Settings Procedure on
page 9-1.
Background Suppression
Sets the default value displayed for Background Suppression. Sets whether to suppress the
document's background color.
You can select Off or On.
On is set at the time of factory shipment.
For more information, refer to Copy Settings : Background Suppression on page 9-30.
Back. Suppression Level
Sets the background suppression level used when Background Suppression is set to On in Scan
Settings. This setting is enabled when scanning black-and-white documents.
You can select from Low, Normal, Higher +1, Higher +2, and Higher +3. Normal is the standard
suppression level, Low is the lowest suppression Level, and Higher +3 is the highest suppression level.
Normal is set at the time of factory shipment.
For more information, refer to Copy Settings : Back. Suppression Level on page 9-30.
Image Compression
Used to set the file compression ratio when document is scanned.
You can select Higher +2, Higher +1, Normal, Lower -1, or Lower -2. Higher +2 is the highest
compression ratio, and Lower -2 is the lowest compression ratio.
Normal is set at the time of factory shipment.
Selecting Higher+2 reduces file size, but also reduces image resolution.
Sharpness
Sets the default sharpness value displayed for Sharpness.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
