199
MAIN SPECIFICATIONS
Page
Main dimension of the tractor (mm)......................................................................... 200
Tractor engine specifications................................................................................... 201
Max. allowed front axle loads (kg)........................................................................... 203
Max. allowed rear axle loads (kg)............................................................................ 203
Max. allowed “tractor + hitched implement” combination weight (kg)...................... 204
Condition of steering ability ..................................................................................... 204
Loading capacity of front tires ................................................................................. 205
Change of front tire loading capacities (%) ............................................................. 205
Loading capacity of rear tires .................................................................................. 206
Change of rear tire loading capacities (%) .............................................................. 206
Allowed wheel combinations for tractors ................................................................. 207
Power-output and consumption............................................................................... 208
Lifting force of the three-point hitch ......................................................................... 208
Forward tractor travelling speed - 30 km/h.............................................................. 209
Reverse tractor travelling speed – 30 km/h............................................................. 210
Forward tractor travelling speed - 40 km/h.............................................................. 211
Reverse tractor travelling speed - 40 km/h.............................................................. 212
Independent rear PTO shaft speed......................................................................... 213
Front PTO shaft speed............................................................................................ 213
Contour and track circle diameter ........................................................................... 214