Zte ZXR10 2928 User Manual

Chapter 7 Service Configuration
Confidential and Proprietary Information of ZTE CORPORATION 89
TABLE 93 SET LACP PORT TIMEOUT COMMAND
Format Mode Function
set lacp port
<portlist>
timeout
{long|short}
Global
config
This configures the timeout
information of the port participating
in the aggregation
Result: This configures the timeout information of the port
participating in the aggregation.
5. To set the priority of LACP, use command set lacp
priority <1-65535> in global configuration mode. This is
shown in
Table 94.
TABLE 94 SET LACP PRIORITY COMMAND
Format Mode Function
set lacp
priority <1-
65535>
Global
config
This sets the priority of LACP
Result: This sets the priority of LACP.
6. To display the LACP configuration information, use
command show lacp in global configuration mode. This is
shown in
Table 95.
TABLE 95 SHOW LACP COMMAND
Format Mode Function
show lacp
Global
config
This displays the LACP
configuration information
Result: This displays the LACP configuration information.
7. To display the aggregation information about the LACP
aggregation group, use command show lacp aggregator
[<trunkid>] in global configuration mode. This is shown in
Table 96.
TABLE 96 SHOW LACP AGGREGATOR COMMAND
Format Mode Function
show lacp
aggregator
[<trunkid>]
Global
config
This displays the aggregation
information about the LACP
aggregation group
Result: This displays the aggregation information about the
LACP aggregation group.
8. To display the information of the port where the LACP is
involved in the aggregation, use command show lacp port
[<portlist >] in global configuration mode. This is shown in
TABLE 99 .

Zte ZXR10 2928 Specifications

General

Brand	Zte
Model	ZXR10 2928
Category	Switch
Language	English