Zte ZXR10 2928 User Manual

Chapter 7 Service Configuration
Confidential and Proprietary Information of ZTE CORPORATION 105
1. To create rules of CAC, use command create iptv cac-
rule <rule id> in nas config mode. This is shown in
Table
132.
TABLE 132 CREATE IPTV CAC-RULE COMMAND
Format Mode Function
create iptv cac-
rule <rule id>
Nas config mode This creates rules of
CAC
Result: This creates rules of CAC.
2. To set the name of CAC rule, use command iptv cac-
rule<rulelist> name in nas config mode. This is shown in
Table 133.
TABLE 133 IPTV CAC-RULE COMMAND
Format Mode Function
iptv cac-
rule<rulelist>
name
Nas config mode This sets the name
of CAC rule
Result: This sets the name of CAC rule.
3. To set maximum preview counts of rules, use command
iptv cac-rule <rulelist> prvcount in nas config mode.
This is shown in
Table 134.
TABLE 134 IPTV CAC-RULE PRVCOUNT COMMAND
Format Mode Function
iptv cac-
rule<rulelist>
prvcount
Nas config mode This sets maximum
preview count of
rules
Result: The sets maximum preview count of rules.
4. To set maximum preview time of rules, use command
iptv cac-rule <rulelist> prvtime in nas config mode. This
is shown in
Table 135.
TABLE 135 IPTV CAC-RULE PRVTIME COMMAND
Format Mode Function
iptv cac-
rule<rulelist>
prvtime
Nas config mode This sets max
preview time of
rules
Result: This sets maximum preview time of rules.
5. To set the least preview interval of rules, use command
iptv cac-rule <rulelist> prvinterval in nas config mode.
This is shown in
Table 136.

Zte ZXR10 2928 Specifications

General

Brand	Zte
Model	ZXR10 2928
Category	Switch
Language	English