ZXR10 2920/2928/2952
(V1.0) Access Switch User Manual （Volume I）
102 Confidential and Proprietary Information of ZTE CORPORATION
broadcast signal sent through the provider's backbone network
and servers, allowing viewers to select content on demand, and
take advantage of other interactive TV options. IPTV can be
used through PC or “IP machine box + TV”.
Configuring IPTV Global Parameters
This topic describes the configuration of IPTV.
For the configuration of IPTV, perform the following steps.
1. To set the least view time, use command iptv control
log-time<1-65534> in nas config mode. This is shown in
Table 122.
TABLE 122 IPTV CONTROL LOG-TIME COMMAND
Format Mode
Function
iptv control log-
time<1-65534>
nas
config
mode
This sets the least view time
Result: This sets the least view time.
2. To set the max preview counts on global, use command
iptv control prvcount count in nas config mode. This is
shown in
Table 123.
TABLE 123 IPTV CONTROL PRVCOUNT COUNT COMMAND
Format Mode Function
iptv control
prvcount count
nas
config
mode
This sets the max preview counts
on global
Result: This sets the max preview counts on global.
3. To set the least preview interval of global, use command
iptv control prvinterval in nas config mode. This is
shown
TABLE 124 IPTV CONTROL PRVINTERVAL COMMAND
Format Mode Function
iptv control
prvinterval
nas
config
mode
This sets the least preview interval
of global
Result: This sets the least preview interval of global.
4. To set the max preview time of global, use command
iptv control prvtime in nas config mode. This is shown in
Table 125.
Purpose
Steps
To Next Page
Loading...
Need help?
General