Zte ZXR10 2928 User Manual

ZXR10 2920/2928/2952
(V1.0) Access Switch User Manual （Volume I）
40 Confidential and Proprietary Information of ZTE CORPORATION
<80, 025-49151> in global configuration mode. This is
shown in
Table 17.
TABLE 17 WEB COMMANDS
Format Mode Function
set web enable This enables web function
set web listen-port
<80, 025-49151>
config
This establishes the monitor
port
Result: This enables web function and establishes the
monitor port.
Note: By default username is admin, password is
zhongxing and http monitor port is 80.
E
ND OF STEPS
Configuration of Web management is completed successfully.
Command Modes
ZXR10 2920/2928/2952 allocates the commands to various
modes based on the function. In order to authorize the
facilitation to user’s configuration and management for the
switch only one command can be executed in the special mode
only.
ZXR10 2920/2928/2952 command modes include:
 User mode
 Global configuration mode
 SNMP configuration mode
 Layer 3 configuration mode
 File system configuration mode
 NAS configuration mode
 Cluster management configuration mode
 Basic ACL configuration mode
 Global ACL configuration mode
 Extended ACL configuration mode
 L2 ACL configuration mode
 Hybrid ACL configuration mode
Configuring User Mode
This topic describes the configuration of user mode.
Result
Overview
Purpose

Zte ZXR10 2928 Specifications

General

MAC Address Table Size	16K
VLAN	4K
Jumbo Frame	9K
Power Supply	AC 100-240V, 50/60Hz
Power Consumption	< 30W
Dimensions	440mm x 200mm x 44mm
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Operating Humidity	10% to 90% non-condensing
Storage Humidity	5% to 95% non-condensing
Ports	24 x 10/100/1000Base-T ports, 4 x GE SFP ports