ZXR10 2920/2928/2952
(V1.0) Access Switch User Manual （Volume I）
170 Confidential and Proprietary Information of ZTE CORPORATION
Important! In RADIUS configuration, concept of isp-domain
is introduced. Different domains may be operated by
different ISPs. Access equipment identifies domain that
subscriber belongs to according to domain name in
subscriber name (username@DomainName) input by the
subscriber and sends authentication and billing requests of
subscriber to authentication server and billing server of the
corresponding domain. Each domain has its own RADIUS
server. After a domain is deleted, all the configurations
related to this domain are deleted.
2. To add authentication server to domain, use command
radius isp <ispname> add authentication <A. B. C.
D> [<0-65535>] in nas config mode. This is shown in
Table 274.
TABLE 274 RADIUS ISP ADD AUTHENTICATION COMMAND
Format Mode Function
radius isp
<ispname> add
authentication
<A. B. C. D>
[<0-65535>]
nas config This add
authentication
server to domain
Result: This add authentication server to domain.
3. To delete the authentication server from domain, use
command radius isp <ispname> delete authentication
<A. B. C. D> in nas config mode. This is shown in
Table 275.
TABLE 275 RADIUS ISP DELETE AUTHENTICATION COMMAND
Format Mode Function
radius isp
<ispname> delete
authentication
<A. B. C. D>
nas config This deletes the
authentication
server from domain
Result: This deletes the authentication server form domain.
Note: A domain can be configured with up to three
authentication servers. Priority of server is determined by
configuration order. First server configured enjoys highest
priority, and last server has lowest priority. When a server
is deleted, priorities of related servers rise in sequence.
4. To add an accounting server to the domain, use
command radius isp <ispname> add accounting <A. B.
C. D> [<0-65535>] in nas config mode. This is shown in
Table 276.
To Next Page
Loading...
Need help?
General