Zte ZXR10 2928 User Manual

Chapter 9 Network Management
Confidential and Proprietary Information of ZTE CORPORATION 279
TABLE 434 ASSEMBLING PORT INFORMATION
Parameters Description
Group Num Assembling group number that assembling
port belongs to
Group Mode Assembling mode that assembling port
belongs to
Lacp Time Overtime of assembling port
LacpActiv Active/passive mode of assembling port
2. To configure basic attributes “AdminStatus” and
“LacpPriority” of LACP, and attributes “LacpTime” and
“LacpActive” of assembling port in the page.
3. After configuration click Apply button to submit.
Result: This configures basic attribute of LACP.
4. To configure batch assembling port attributes, select the
check boxes of assembling ports Select All, all ports are
selected, then click Set button to open batch assembling
ports configuration page, as shown in
Figure 62.
FIGURE 62 BATCH ASSEMBLING PORTS CONFIGURATION
5. To configure assembling port attributes in the page, click
Apply button to submit.
Result: This configures assembling port attributes.
6. Click the catalog tree in the left of system main page
Configuration > Lacp > Lacp State to open assembling
group information page, as shown in
Figure 63.

Zte ZXR10 2928 Specifications

General

Brand	Zte
Model	ZXR10 2928
Category	Switch
Language	English