Chapter 5 Usage and Operation
Confidential and Proprietary Information of ZTE CORPORATION 43
1. In the global configuration mode, execute the command
config tffs to enter the file system configuration mode, as
shown below:
zte(cfg)#config tffs
zte(cfg-tffs)#
Note: In the file system configuration mode, switch file
system can be operated, including adding file directory,
deleting file or directory, modifying file name, displaying file
or directory, changing file directory, uploading/downloading
files through TFTP, copying files, formatting Flash, and so
on.
2. To return to the global configuration mode from the file
system configuration mode, use command exit or press
Ctrl+Z.
E
ND OF STEPS
File system mode has been configured.
Configuring NAS Mode
This topic describes the NAS configuration mode.
For the configuration of NAS mode, perform the following steps.
1. In the global configuration mode, execute the command
config nas to enter into NAS configuration mode, as shown
below:
zte(cfg)#config nas
zte(cfg-nas)#
Note: In the NAS configuration mode, configuration of
switch access service including user access authentication
and management.
2. To return to the global configuration mode from the NAS
configuration mode, use command exit or press Ctrl+Z.
E
ND OF STEPS
NAS mode has been configured.
Configuring Cluster Management
This topic describes the cluster management configuration mode.
For the configuration of cluster management, perform the
following steps.
1. In the global configuration mode, execute command config
group to enter the cluster management configuration mode,
as shown below:
Result
Purpose
Steps
Result
Purpose
Steps
To Next Page
Loading...
Need help?
General
