Zte ZXR10 2928 User Manual

Chapter 7 Service Configuration
Confidential and Proprietary Information of ZTE CORPORATION 81
11. To permit port on VLAN, use command set vlan <vlanlist>
permit port <portlist> in global configuration mode. This
is shown in
Table 74.
TABLE 74 SET VLAN PERMIT PORT COMMAND
Format Mode Function
set vlan
<vlanlist>
permit port
<portlist>
Global
config
This permits port on VLAN
Result: This permits port on VLAN.
12. To forbid trunk on VLAN, use command set vlan <vlanlist>
forbid trunk <trunklist> in global configuration mode.
This is shown in
Table 75.
TABLE 75 SET VLAN FORBID TRUNK COMMAND
Format Mode Function
set vlan
<vlanlist>
forbid trunk
<trunklist>
Global
config
This forbids trunk on VLAN
Result: This forbids trunk on VLAN.
13. To permit trunk on VLAN, use command set vlan
<vlanlist> permit trunk <trunklist> in global configuration
mode. This is shown in
Table 76.
TABLE 76 SET VLAN PERMIT TRUNK COMMAND
Format Mode Function
set vlan
<vlanlist>
permit trunk
<trunklist>
Global
config
This permits trunk on VLAN
Result: This permits trunk on VLAN.
14. To displays VLAN information, use command show vlan
[<vlanlist>] in global configuration mode. This is shown in
Table 77.
TABLE 77 SHOW VLAN COMMAND
Format Mode Function
show vlan
[<vlanlist>]
Global
config
This displays VLAN information
Result: This displays VLAN information.
E
ND OF STEPS

Zte ZXR10 2928 Specifications

General

MAC Address Table Size	16K
VLAN	4K
Jumbo Frame	9K
Power Supply	AC 100-240V, 50/60Hz
Power Consumption	< 30W
Dimensions	440mm x 200mm x 44mm
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Operating Humidity	10% to 90% non-condensing
Storage Humidity	5% to 95% non-condensing
Ports	24 x 10/100/1000Base-T ports, 4 x GE SFP ports