Zte ZXR10 2928 User Manual

ZXR10 2920/2928/2952
(V1.0) Access Switch User Manual （Volume I）
94 Confidential and Proprietary Information of ZTE CORPORATION
Format Mode Function
interval <10-
250>
Result: This sets the snooping interval.
10. To set multicast member/route timeout, use command
set igmp snooping timeout <100-2147483647>
{host|router} in global configuration mode. This is
shown in
Table 104.
TABLE 104 SET IGMP SNOOPING TIMEOUT COMMAND
Format Mode Function
set igmp
snooping
timeout <100-
2147483647>
{host|router}
Global
config
This sets multicast member/route
timeout
Result: This sets multicast member/route timeout.
11. To bind static multicast group to ports on Vlan, use
command set igmp snooping vlan <1-4094> add group
<A. B. C. D> [port <portlist> |trunk <trunklist>] in
global configuration mode. This is shown in
Table 105.
TABLE 105 STATIC MULTICAST GROUP TO PORTS COMMAND
Format Mode Function
set igmp
snooping vlan
<1-4094> add
group <A. B.
C. D>[ port
<portlist>|
trunk
<trunklist>]
Global
config
This binds static multicast group to
ports on Vlan
Result: This binds static multicast group to ports on Vlan.
12. To delete a static multicast group, use command set
igmp snooping vlan <vlanname> delete group <A. B.
C. D> in global configuration mode. This is shown in
Table 106.
TABLE 106 SET IGMP SNOOPING VLAN DELETE COMMAND
Format Mode Function
set igmp
snooping vlan
<vlanname>
delete group
<A. B. C.
D>
Global
config
This deletes a static multicast
group

Zte ZXR10 2928 Specifications

General

Brand	Zte
Model	ZXR10 2928
Category	Switch
Language	English