MECHANICAL INSTALLATION
PRODUCT
ACS6000
DOCUMENT KIND
User manual
DOCUMENT ID.
3BHS212794 E01
REV.
N
LANG.
en
PAGE
116/266
Procedure:
1. Assemble the roof attachment.
2. Tighten the bolts firmly.
3. To fix the drive to the ceiling or the back wall, use two suitable struts per roof
attachment.
WARNING! DO NOT install the struts at a 90° angle to the cabinet roof
(Fig. 5-24).
The struts are not supplied.
4. If you fix the drive to the ceiling, use two struts per roof attachment (1 in
Fig. 5-24).
5. If you fix the drive to the back wall, install one strut in a 90° angle to the drive
(2 in Fig. 5-24).
Figure 5-24 Recommended ceiling and wall fixings
1) Two struts at 45° to ceiling
2) One strut at 90° to wall
3) Do not install the struts at a 90° angle to the
cabinet roof
1 2 3
To Next Page
Loading...
Need help?
General
