ELECTRICAL INSTALLATION
PRODUCT
ACS6000
DOCUMENT KIND
User manual
DOCUMENT ID.
3BHS212794 E01
REV.
N
LANG.
en
PAGE
133/266
6.7.2. Preparing cables for sealing modules
1. Prepare cables with an outer cable screen or shield for EMC bonding with the
metal enclosure of the cabinet as illustrated in Fig. 6-18.
Figure 6-18 Preparing power cables for sealing modules
2. Install the sealing modules according to the instructions of the sealing
module supplier.
1) Sealing module
2) Frame
3) Conductive foil of sealing module
4) Cable clamp
5) Shrinkable sheath seal
6) Heat shrinkable termination
7) Outer cable sheath
8) Cable sheath removed to expose cable
shield
9) Shield extension to connect to PG busbar
10) Cable screen extension to connect to the
PG busbar
11) Cable lug as specified by the cable supplier
and suitable for M12 bolt
12) Sheath seal
1
2
4
5
6
To Next Page
Loading...
Need help?
General
