TRANSPORTATION, STORAGE AND DISPOSAL
PRODUCT
ACS6000
DOCUMENT KIND
User manual
DOCUMENT ID.
3BHS212794 E01
REV.
N
LANG.
en
PAGE
77/266
4. Transportation, storage and disposal
4.1. Safety
4.2. Transport conditions
The transport conditions for the drive are based on IEC 60721-3-2.
4.3. Unpacking and inspection
1. Remove all packaging material carefully.
2. Check the drive and accompanying equipment for damages.
3. Compare the complete delivery with the purchase order and the packing list.
4. If parts are missing or damaged, immediately inform the shipping company
and the ABB service organization.
It is recommended to photograph the damages and send the photographs to
ABB.
4.4. Identifying transport units
A delivery can consist of transport units for several drives. To identify the
transport units and assign them to a particular drive, see the following
accompanying papers for information:
– Packing list that is attached to the packaging of each transport unit
– Packing label on the back wall of each drive unit (PCU, COU, WCU). The packing
label is only visible after the packaging has been removed.
4.4.1 Packing list
The “Commodity description” column of the packing list states the number of the
drive that the transport unit belongs to.
The drive must only be handled by personnel who are skilled and
experienced in unpacking and transporting heavy equipment.
– Classification: 2K12 / 2B1 / 2C2 / 2S5 / 2M4
(1)
(1)
Special conditions apply to marine drives
ABB item
Customer item
Qty. Unit. Identnumber Commodity description
001201 1 PC
Converter 1
(1)
: Transport Unit 1
ABB Switzerland Ltd
Drives
To Next Page
Loading...
Need help?
General
