Chapter 3
Programming Terminals
3–12
or
or
or
Search Mode
The Search Mode is only available with a
Series A (version 3.0) or Series B HIM.
This mode allows you to search through the
parameter list and display all parameters that
are not at the factory default values. This
mode also offers an option to search
parameter links for links that are not factory
defaults.
From the Status Display, press Enter (or
any key). “Choose Mode” will be
shown.
Press the Increment (or Decrement) key
until “Search” is displayed.
Press Enter. The HIM will display the
Search Parameters, or Search Links
screen. Use the Increment or Decre-
ment key to toggle between screens.
From the Search Parameters display,
press Enter. The HIM will search
through all parameters and display any
parameters that are not at their factory
default values.
Press the Increment (or Decrement) key
to scroll through the list.
To search parameter links, toggle to the
Search Links display from the Search
Parameters display using the Increment
or Decrement key.
From the Search Links display, press
Enter. The HIM will search through all
links and display any links that are not
at their factory default values.
Choose Mode
Search
Choose Mode
Display
Proc Trim Fdbk
–0.03% 28
Search
Parameters
Proc Trim Fdbk
<28x – – – 355
Search
Links
To Next Page
Loading...
Need help?
General
