2X-A Series Installation Manual 165
Index
A
acoustic indications, 14
alarm display format (VdS Settings), 82
area configuration, 107
autosetup, 98
B
battery
compatible batteries, 28
fault indications, 135
installation location, 28
maintenance, 135
maximum capacity, 28
replacement, 135
start-up, 136
test, 61
BMS configuration, 97
buzzer, on or off, 80
C
cabinet
installation, 22
layout, 19
cables, recommended, 31
Class A loop, 32
Class A loop (EN 54-13), 33
command filter, 74
commissioning checklist, 132
condition, notifications, 83
conditions, 15
configuration controls, 49
configuration recommendations, 49
connections
aux. equipment, 38
batteries, 40
Class A loop, 34
Class B loop, 35
external printer, ASCII terminal, 43
fire network, 41
inputs, 36
internal printer, 26
mains terminal block, 39
outputs, 37
UI cable, 25
control panel configuration
load, 84
restore default, 85
restore previous, 84
save, 85
custom screens, adding, 87
D
DACT
CMS configuration, 93
Ethernet configuration, 92
PSTN configuration, 94
Site configuration, 92
date and time
change, 53
SNTP options, 96
day/night mode, 53
delays
activation configuration, 117
Alert Cancellation Time (ACT), 106
Confirmation Inhibition Time (CIT), 106
extended fire routing, 121
general delays, 120
investigation modes, 121
investigation time defaults, 123
maximum acknowledgement time, 121
output groups, 117
per zone, 119
second stage delay, 123
Sounder Start/Stop button disable, 125
warning time, 123
detector dirty warning, 83
device
add, 100
configuration, 100
disable, 58
enable, 58
locate, 61
self-test, 81
device type
disable, 58
enable, 58
diagnostics tests, 128
To Next Page
Loading...
Need help?
General
