Aritech 2X-AF2-FB-PRT-P Installation Manual

Chapter 3: Configuration and commissioning
68 2X-A Series Installation Manual
Installer level operation and configuration
The installer level is password-protected and is reserved for authorized users
installing and configuring the control panel and the fire system. The default
password for the default installer user is 4444.
The Main menu
The installer level Main menu is shown below.
Figure 24: The installer level Main menu
Panel configuration
Use the Panel setup menu to access the control panel configuration options
shown below.
Table 25: Control panel configuration
Option
Description
ID configuration
Configures the control panel Firenet ID (for the fire network) and
description. The description is displayed on the LCD when the
control panel is in standby.
Date and time
Configures the control panel date and time, and to synchronize the
date and time in a fire network. See “Date and time” on page 53.
Day/Night mode
Configures the sensitivity settings for the day/night schedule and
for the holiday calendar. See “Day/Night mode sensitivity settings”
on page 53.
Regional options
Configures the control panel's regional operation mode.
Firenet
Configures the control panel fire network.
Communications
Configures TCP/IP communication settings, to manage email
accounts (for event notifications), and to safely remove a USB
device.
Other settings
Configures general panel settings, including 24V AUX output, fault
mask, sounder re-sound, buzzer activation, condition notifications,
PSU supervision, etc.
Load/Save c
onfiguration Loads a new configuration, saves the current configuration file to a
USB flash drive, restores the previous configuration, or restores the
default factory settings.
Expansion boards
Configures any installed expansion boards.

Aritech 2X-AF2-FB-PRT-P Specifications

General

Brand	Aritech
Model	2X-AF2-FB-PRT-P
Category	Smoke Alarm
Language	English