Chapter 1: Introduction
2X-A Series Installation Manual 3
Description
-AFR Addressable fire alarm repeater panel
-AFR-FB Addressable fire alarm repeater panel with fire routing and fire
protection controls
[1] Includes a fireman's key.
Table 3: Large cabinet control panels with up to 10 A output (-P variants)
Description
-AE2-P Two-loop addressable fire and evacuation alarm control panel
-AF2-P Two-loop addressable fire alarm control panel
-AF2-PRT-P Two-loop addressable fire alarm control panel with internal printer
-AF2-FB-P Two-loop addressable fire-P
alarm control panel with fire routing and fire
protection controls
-AF2-FB-PRT-P Two-loop addressable fire alarm control panel with fire routing and fire
protection controls and internal printer
-AF2-SCFB-P Two-loop addressable SS 3654 fire alarm control panel with fire routing
and fire protection controls [1]
[1] Includes a fireman's key.
Repeater functionality
All control panels in a fire network can be configured for repeater functionality,
provided that they have a network board installed. For more information, see
“Firenet configuration” on page 71.
Fire routing and fire protection control and indication
In this document, information on control and indication for fire routing and fire
protection applies only to control panels that include those features.
Battery installation for large cabinet control panels (-P variants)
Depending on the batteries selected for your installation requirements, the
batteries for large cabinet control panels with a 10 A power supply (-P variants)
may need to be installed in an external battery box (not supplied). See “Battery
installation” on page 28 for more details.
Product compatibility
Products compatible with these control panels are listed in the product
compatibility list. Only those products specified in the compatibility list are
guaranteed to be compatible.
To download the latest product compatibility list, visit firesecurityproducts.com.
To Next Page
Loading...
Need help?
General
