145R5906112 /15 UDX
Image 10–48 Example of the Standby mode menu
2. Select the desired standby time-out timeframe, or disable standby mode all together by selecting Ready.
Image 10–49 Example of the Standby mode menu with Standby mode disabled
Tip: When Ready is chosen, the projector will remain in Ready mode regardless of the timeframe,
unless the main power is cut or the projector is turned OFF.
10.14 Lens features
What can be done?
Some lens features can be disabled once they are correctly aligned so that a misalignment during a show is
not possible.
How to enable/disable
1. In the main menu, select System Settings → Lens Features.
Image 10–50 Settings menu, Lens features
The Lens features menu is displayed.
GUI – System Settings
To Next Page
Loading...
Need help?
General
