R5906112 /15 UDX144
Image 10–46
The list of cities is updated according the selected region.
6. Select City and select the city corresponding with your time line.
7. Select Apply to activate.
10.13 Power saving settings – Standby mode
Why change the power saving features?
As a power-saving feature, if the projector is projecting no image, it will automatically go to Ready mode and
later Standby mode after 15 minutes each. While in standby mode, it is no longer possible to use the OSD for
anything other than the status overview of the projector. You can not access the projector menus while the
projector is in Standby mode.
If you want to be able to access the projector menus for a longer period of time, or if you want to reduce the
time the projector remains idle, it is best to change the power settings to your own personal preferences.
Alternatively, you can also disable this power-saving feature, ensuring that all power state transitions have to
be done manually, or via remote commands (e.g. by using DMX).
How to change the power saving features?
1. In the main menu, select Settings → Standby mode.
Image 10–47 Settings menu, Standby mode
The Standby mode menu is displayed.
GUI – System Settings
To Next Page
Loading...
Need help?
General
