75R5906112 /15 UDX
Image 7–30 Example of one of the presets, here DCI-P3
Note: After choosing one of the presets, you can still alter the values of the coordinates to your
own choosing, similarly to how you set custom P7 values.
Use the Reset icon to return to the default values of the chosen preset.
7.7 Setting the output resolution
This menu is only available on the 4k models, with an actuator included.
How to determine the desired output resolution for my content
While the native output resolution of this projector is 4K in Ultra-High Definition (4K-UHD), sometimes it can be
better to choose an alternate resolution, depending on the main purpose of the projected content:
• If the main purpose of the projection is image (e.g. photographs, movie, or similar purpose), use the 4K
UHD output resolution for the best image at the highest possible light output.
• If the main purpose of the projection is text (e.g. spreadsheets, presentations, or similar purposes), use the
4K UHD S output resolution for the for the most stable and sharpest possible output.
• If the main purpose of the projection is HFR video (content with high framerate, e.g. racing games), use
the WQXGA output resolution. This will disable the actuator and allow content of up to 120 FPS to be
played.
How to choose the output resolution
1. In the main menu, select Image → Advanced → Output resolution.
Image 7–31 Advanced settings menu, Output resolution
The Output resolution menu is displayed.
GUI – Image
To Next Page
Loading...
Need help?
General
