Brother PJ-722 User Manual

135
13
13
* These figures vary by environment. “Our standard environment” is as follows:
JEITA J1 pattern printed continuously on A4 size paper when connected by the USB interface and the
fully-charged battery is installed
Print density=6, Environment temperature=77 F / 25C
Product Specifications 13
Model Name PJ-722 PJ-723 PJ-762 PJ-763 PJ-763MFi PJ-773
Size
Dimensions Approximately 10.04 (W) x 2.17 (D) x 1.18 (H) in. / 255 (W) x 55 (D) x 30 (H) mm
Weight Approximately 1.06 lb. / 480 g (excluding battery, paper)
Approximately 1.34 lb. / 610 g (including battery, excluding paper)
Printing
Method Direct thermal printing
Print speed* Maximum: 8 PPM
Resolution 200 dpi 300 dpi 200 dpi 300 dpi
Printable area Configure
with printer
driver (min.
4.13" x 1.00"/
105 mm x
25.4 mm -
max. 8.5" x 27
ft / 216 mm x
8230 mm)
Configure
with printer
driver (min.
4.13" x 1.00"/
105 mm x
25.4 mm -
max. 8.5" x 18
ft / 216 mm x
5490 mm)
Configure
with printer
driver (min.
4.13" x 1.00"/
105 mm x
25.4 mm -
max. 8.5" x 27
ft / 216 mm x
8230 mm)
Configure with printer driver (min. 4.13" x 1.00"/
105 mm x 25.4 mm - max. 8.5" x 18 ft / 216 mm
x 5490 mm)
Paper size A5 (5.83" x 8.27" / 148 x 210 mm), A4 (8.27" x 11.69" / 210 x 297 mm), Letter (8.5" x 11" / 216
x 279 mm), Legal (8.5" x 14" / 216 x 356 mm), infinite
Power supply (optional)
Battery 10.8 V
Adapter AC adapter (15 V)
Car adapter Cigarette/wired car adapter (12 V (DC))
Battery yield* Approximately 600 sheets

Brother PJ-722 Specifications

General

Print Technology	Direct Thermal
Print Speed	Up to 8 ppm
Interface	USB
Power Source	AC adapter
Dimensions	255 mm x 55 mm x 30 mm
Weight	480 g
Paper Size	A4, Letter
Media Type	Roll paper, Fanfold paper