Brother PJ-722 User Manual

Changing the Printer Settings
84
3
8 Dash Line Print
Prints dash lines between pages, useful when printing on roll paper. Set [Form Feed Mode] to [Fixed
Page], and then select [Enable]. Note that dash lines are printed on the paper; they are not punched into
the paper.
Available settings: [Enable], [Disable]
9 Stencil Paper Mode
Available settings: [ON], [OFF]
Printer Settings Tab 3
1 Auto Power On
Specifies how the printer responds when connected to an AC or DC power outlet or when the battery is
installed.
Available settings: [Disable], [Enable], [Enable (No Main Button)]
2 Auto Power Off (AC/DC)
Specifies the amount of time that passes before the printer turns off automatically when connected to an
AC or DC power outlet.
Available settings: [None], 1/2/3/4/5/6/7/8/9/10/15/20/25/30/40/50/60/90/120 minutes
3 Auto Power Off (Li-ion)
Specifies the amount of time that passes before the printer turns off automatically when powered by the
battery.
Available settings: [None], 1/2/3/4/5/6/7/8/9/10/15/20/25/30/40/50/60/90/120 minutes
4 Paper Sensor Threshold
Specifies the threshold of the paper detection sensor.
Available settings: 0-255
5 Print Data after Printing
Allows to erase print data after it is printed.
Available settings: [Erase All Print Data], [Keep Print Data]
3
2
4
5
6
7
8
1
9

Brother PJ-722 Specifications

General

Print Technology	Direct Thermal
Print Speed	Up to 8 ppm
Interface	USB
Power Source	AC adapter
Dimensions	255 mm x 55 mm x 30 mm
Weight	480 g
Paper Size	A4, Letter
Media Type	Roll paper, Fanfold paper