Brother PJ-722 User Manual

Using the Printer
32
2
Setting Printer Driver Options 2
You can configure various settings such as paper size and number of copies, in the printer driver screen.
To use the functions indicated with an asterisk (*), install the printer driver that will be available in February
2016 and thereafter. The newest version can be downloaded from the Brother Solutions Center website:
support.brother.com
.
Note
You can also use the Printer Setting Tool (see Changing the Printer Settings on page 45) to configure
advanced settings.
Settings That Can Be Changed Using the Windows
®
Printer Driver (Examples) 2
Basic Tab 2
1 Paper Type
Specifies the type of paper that is loaded.
Available settings: [Cut Sheet], [Roll], [Perforated Roll]
2 2-ply Mode
Specifies the setting for using 2-ply paper.
Available settings: [Enable], [Disable]
3 Roll Printer Case
Specifies the setting for using the optional roll printer case. If [PA-RC-001] or [PA-RC-001 (Without Anti
Curl)] is selected, you can adjust the feed value or amount of paper retraction for the roll printer case.
Available settings: [Printer Default], [None], [PA-RC-001], [PA-RC-001 (Without Anti Curl)]
* This screen image may be different from
your screen.
1
3
4
7
8
5
6
9
2

Brother PJ-722 Specifications

General

Print Technology	Direct Thermal
Print Speed	Up to 8 ppm
Interface	USB
Power Source	AC adapter
Dimensions	255 mm x 55 mm x 30 mm
Weight	480 g
Paper Size	A4, Letter
Media Type	Roll paper, Fanfold paper