Brother PJ-722 User Manual

Changing the Printer Settings
76
3
P-touch Template Settings Dialog Box 3
1 Default Command Mode
Specifies the P-touch Template mode as the default mode.
To change the mode, use the Device Settings.
2 Default Template Number
Specifies a template number to select as default when the printer is turned on.
However, if a template is not to be transferred to the printer, do not specify a template number.
3 Data Delimiter for P-touch Template
A symbol used to indicate when to move to the next object in the data being sent. Between 1 and 20
characters can be specified.
4 Trigger for P-touch Template Printing
You can specify a trigger to begin printing from a number of options.
[Command Character]: Printing starts when the command character specified here is received.
[Data Insertion into All the Objects]: Printing starts when the delimiter for the last object is received.
[Received Data Size]: Printing starts when the number of characters specified here is received. However,
delimiters are not counted in the number of characters.
5 Character Code Table
Select one of the following three character code sets.
Available settings: [Windows 1251], [Windows 1252], [Windows 1250 Eastern Europe], [Brother
standard]
3
2
4
5
6
7
8
9
10
13
11 12
1

Brother PJ-722 Specifications

General

Print Technology	Direct Thermal
Print Speed	Up to 8 ppm
Interface	USB
Power Source	AC adapter
Dimensions	255 mm x 55 mm x 30 mm
Weight	480 g
Paper Size	A4, Letter
Media Type	Roll paper, Fanfold paper