Brother PJ-722 User Manual

Changing the Printer Settings
83
3
Print Settings Tab 3
1 Command Mode
Specifies the printer’s command format.
Available settings: [Raster], [ESC/P Legacy], [ESC/P Brother], [P-touch Template]
2 Print Density
Specifies the printing density.
Available settings: 0-10
3Print Speed
Specifies the printing speed in inches or millimeters per second.
Available settings: [1.1 ips / 27 mm/s], [1.6 ips / 41 mm/s], [1.9 ips / 48 mm/s], [2.5 ips / 65 mm/s]
4 Extended Characters
Specifies which characters are used when printing ASCII characters 128 to 255.
Available settings: [Italic], [Graphics]
5 Character Set Map
Specifies which character set is used, allowing you to print special characters appropriate for the language
selected.
Available settings: [USA], [France], [Germany], [United Kingdom], [Denmark I], [Sweden], [Italy],
[Spain I], [Japan], [Norway], [Denmark II], [Spain II], [Latin America], [Korea], [Legal]
6 Default Font
Specifies which built-in font is used.
Available settings: [Serif], [Sans Serif]
7 Character Attributes
Specifies the attributes used for printed text.
Available settings: [Reduce Character Size], [Bold], [Double Width], [Underline]
3
2
4
5
6
7
8
1
9

Brother PJ-722 Specifications

General

Print Technology	Direct Thermal
Print Speed	Up to 8 ppm
Interface	USB
Power Source	AC adapter
Dimensions	255 mm x 55 mm x 30 mm
Weight	480 g
Paper Size	A4, Letter
Media Type	Roll paper, Fanfold paper