Brother PJ-722 User Manual

Setting Up the Printer
8
1
Button Functions 1
(Power) button function
Operation
Turn the printer on Press and hold the button for about one second until the POWER indicator
turns on.
Turn the printer off Press and hold the button for about one second or press it quickly two times
depending on the setting specified in the Printer Setting Tool (see Changing the
Printer Settings on page 45). (If the [Auto Power Off] feature is enabled in the
Printer Setting Tool, the printer will turn itself off automatically after the selected
period of inactivity.)
Start up the printer in Mass Storage
Mode
If you press and hold the button while also pressing the (Feed) button, the
printer starts up in mass storage mode (see Mass Storage Mode on page 91).
(Feed) button function Operation
Feed paper Load the paper and press the button to feed the paper.
If you continue to hold down the button after about 1/2 inch (12.7 mm) of paper
has been fed, about one page length of paper is fed at high speed. The amount
of paper fed is determined by the [Form Feed Mode] setting in the Printer
Setting Tool (see Changing the Printer Settings on page 45).
To ensure that printing is complete, wait five seconds after the printer has
received the data before using a form feed.
Print the printer settings (see Confirm
the Printer Settings on page 90)
To print the printer settings without connecting the printer to a computer or
mobile device:
1 Turn the printer on and make sure no paper is loaded.
2 Press and hold the button until the DATA indicator lights in red.
3 Load paper.

Brother PJ-722 Specifications

General

Print Technology	Direct Thermal
Print Speed	Up to 8 ppm
Interface	USB
Power Source	AC adapter
Dimensions	255 mm x 55 mm x 30 mm
Weight	480 g
Paper Size	A4, Letter
Media Type	Roll paper, Fanfold paper