Canon EOS 80D User Manual

205
F : Bulb Exposures
You can preset the bulb exposure’s exposure time. With the bulb timer,
you need not keep holding down the shutter button during the bulb
exposure. This reduces camera vibration blur.
The bulb timer can be set only in the <
F > (Bulb) shooting mode. It
cannot be set (or will not function) in any other shooting mode.
1
Select [Bulb timer].
 Under the [ z 4 ] tab, select [ Bulb
timer
], then press < 0 >.
2
Select [Enable].
 Select [ Enable ], then press the
<
B > button.
p Bulb TimerN
 With [z3: Long exp. noise reduction], you can reduce the noise
generated during long exposures (p.172).
 For bulb exposures, using a tripod and bulb timer is recommended.
Using mirror lockup (p.219) with bulb exposures is also possible.
 You can also shoot bulb exposures by using Remote Switch RS-60E3
(sold separately, p.221).
 You can also use Remote Controller RC-6 (sold separately, p.221) for
bulb exposures. When you press the remote controller’s transmit button,
the bulb exposure will start immediately or 2 sec. later. Press the button
again to stop the bulb exposure.

Canon EOS 80D Specifications

General

Sensor	APS-C CMOS
Megapixels	24.2 MP
ISO Range	100-16000 (expandable to 25600)
Continuous Shooting Speed	7 fps
Video Resolution	1080p at 60 fps
Screen	3.0-inch Vari-angle touchscreen LCD
Connectivity	Wi-Fi, NFC
Battery Life	Approx. 960 shots (CIPA)
Camera Type	DSLR
Lens Mount	Canon EF/EF-S
Battery	LP-E6N
Weight	730 g (body only)
Dimensions	139 x 105.2 x 78.5 mm
Storage Media	SD/SDHC/SDXC card
Autofocus Points	45 points
Viewfinder	Optical pentaprism, 100% coverage
Shutter Speed	1/8000 to 30 sec