Canon EOS 80D User Manual

274
You can select the AF operation characteristics to suit the shooting
conditions or subject. In Basic Zone modes, the optimum AF operation
is set automatically for the respective shooting mode.
1
Press the <f> button.
2
Select the AF operation.
 Press the < Y > < Z > keys to select
the desired AF operation, then press
<
0 >.
X : One-Shot AF
K : Servo AF
Suited for still subjects. When you press the shutter button
halfway, the camera will focus only once.
 When focus is achieved, the AF point will turn green and the beeper
will sound.
 While you hold down the shutter button halfway, the focus will be
locked. You can then recompose the shot if desired.
Selecting the AF OperationN
One-Shot AF for Still Subjects
If focus cannot be achieved, the AF point will turn orange. If this occurs, the
picture cannot be taken even if the shutter button is pressed completely.
Recompose the shot and try to focus again. Or see “Shooting Conditions
that Make Focusing Difficult” (p.284).
If [z1: Beep] is set to [Disable], the beeper will not sound when focus is
achieved.

Canon EOS 80D Specifications

General

Sensor	APS-C CMOS
Megapixels	24.2 MP
ISO Range	100-16000 (expandable to 25600)
Continuous Shooting Speed	7 fps
Video Resolution	1080p at 60 fps
Screen	3.0-inch Vari-angle touchscreen LCD
Connectivity	Wi-Fi, NFC
Battery Life	Approx. 960 shots (CIPA)
Camera Type	DSLR
Lens Mount	Canon EF/EF-S
Battery	LP-E6N
Weight	730 g (body only)
Dimensions	139 x 105.2 x 78.5 mm
Storage Media	SD/SDHC/SDXC card
Autofocus Points	45 points
Viewfinder	Optical pentaprism, 100% coverage
Shutter Speed	1/8000 to 30 sec