Canon EOS 80D User Manual

456
You can power the camera with a household power outlet by using the
DC Coupler DR-E6 and AC Adapter AC-E6N (both sold separately).
1
Place the cord in the groove.
 Insert the DC coupler’s cord carefully
without damaging the cord.
2
Insert the DC coupler.
 Open the battery compartment cover
and open the DC coupler cord hole
cover.
 Insert the DC coupler securely until it
locks and put the cord through the
hole.
 Close the cover.
3
Connect the DC coupler’s plug.
 Connect the DC coupler’s plug and
the AC adapter’s connector securely.
4
Connect the power cord.
 Connect the power cord as shown in
the illustration.
 After using the camera, unplug the
power plug from the power outlet.
Using a Household Power Outlet
DC coupler cord hole
Do not connect or disconnect the power cord or DC coupler while leaving
the camera’s power switch set to the <1> position.
AC Adapter Kit ACK-E6 (sold separately) can also be used.

Canon EOS 80D Specifications

General

Sensor	APS-C CMOS
Megapixels	24.2 MP
ISO Range	100-16000 (expandable to 25600)
Continuous Shooting Speed	7 fps
Video Resolution	1080p at 60 fps
Screen	3.0-inch Vari-angle touchscreen LCD
Connectivity	Wi-Fi, NFC
Battery Life	Approx. 960 shots (CIPA)
Camera Type	DSLR
Lens Mount	Canon EF/EF-S
Battery	LP-E6N
Weight	730 g (body only)
Dimensions	139 x 105.2 x 78.5 mm
Storage Media	SD/SDHC/SDXC card
Autofocus Points	45 points
Viewfinder	Optical pentaprism, 100% coverage
Shutter Speed	1/8000 to 30 sec