Canon EOS 80D User Manual

387
Changing Image Playback Settings
Vertical images are rotated automatically so they
are displayed vertically on the camera’s LCD
monitor and on the computer instead of
horizontally. You can change the setting for this
feature.
1
Select [Auto rotate].
 Under the [ 5 1 ] tab, select [ Auto
rotate
], then press < 0 >.
2
Set the image rotation.
 Select the desired setting, then press
<
0 >.
 On zD
The vertical image is automatically rotated during playback on both
the camera’s LCD monitor and on the computer.
 On D
The vertical image is automatically rotated only on the computer.
 Off
The vertical image is not automatically rotated.
3 Auto Rotation of Vertical Images
Auto rotation will not work with vertical images captured while auto rotation
was [Off]. They will not rotate even if you later switch it to [On] for playback.
 Immediately after image capture, the vertical image will not be
automatically rotated for the image review.
 If the vertical image is taken while the camera is pointed up or down, the
image may not be rotated automatically for playback.
 If the vertical image is not automatically rotated on the computer screen,
it means the software you are using is unable to rotate the image. Using
the EOS software is recommended.

Canon EOS 80D Specifications

General

Sensor	APS-C CMOS
Megapixels	24.2 MP
ISO Range	100-16000 (expandable to 25600)
Continuous Shooting Speed	7 fps
Video Resolution	1080p at 60 fps
Screen	3.0-inch Vari-angle touchscreen LCD
Connectivity	Wi-Fi, NFC
Battery Life	Approx. 960 shots (CIPA)
Camera Type	DSLR
Lens Mount	Canon EF/EF-S
Battery	LP-E6N
Weight	730 g (body only)
Dimensions	139 x 105.2 x 78.5 mm
Storage Media	SD/SDHC/SDXC card
Autofocus Points	45 points
Viewfinder	Optical pentaprism, 100% coverage
Shutter Speed	1/8000 to 30 sec