Canon EOS 80D User Manual

404
Whenever you set the power switch to < 1 > or < 2 >, the Self
Cleaning Sensor Unit is activated to automatically shake off the dust on
the front of the sensor. Normally, you need not pay attention to this
operation. However, you can choose to perform sensor cleaning
manually, or disable it.
1
Select [Sensor cleaning].
 Under the [ 5 3 ] tab, select [ Sensor
cleaning
], then press < 0 >.
2
Select [Clean nowf].
 Select [ Clean now f ], then press
<
0 >.
 Select [ OK ].
 The screen will indicate that the
sensor is being cleaned. (A small
sound may be heard.) Although there
will be a shutter release sound during
the cleaning, no picture is taken.
 In step 2, select [ Auto cleaning f ] and set it to [ Disable ].
 The sensor cleaning will no longer be performed when you set the
power switch to <
1 > or < 2 >.
f Automatic Sensor Cleaning
Cleaning the Sensor Now
Disabling Automatic Sensor Cleaning
 For best results, perform the sensor cleaning with the camera placed
upright and stable on a table or other flat surface.
 Even if you repeat the sensor cleaning, the result will not improve much.
Immediately after the sensor cleaning is finished, the [Clean nowf]
option remains disabled temporarily.

Canon EOS 80D Specifications

General

Sensor	APS-C CMOS
Megapixels	24.2 MP
ISO Range	100-16000 (expandable to 25600)
Continuous Shooting Speed	7 fps
Video Resolution	1080p at 60 fps
Screen	3.0-inch Vari-angle touchscreen LCD
Connectivity	Wi-Fi, NFC
Battery Life	Approx. 960 shots (CIPA)
Camera Type	DSLR
Lens Mount	Canon EF/EF-S
Battery	LP-E6N
Weight	730 g (body only)
Dimensions	139 x 105.2 x 78.5 mm
Storage Media	SD/SDHC/SDXC card
Autofocus Points	45 points
Viewfinder	Optical pentaprism, 100% coverage
Shutter Speed	1/8000 to 30 sec