Canon EOS 80D User Manual

235
With the built-in flash or an EX-series, external Speedlite compatible
with flash function settings, you can use the camera’s menu screen to
set flash functions and the external Speedlite’s Custom Functions.
If
you use an external Speedlite, attach the Speedlite to the camera
and turn on the Speedlite before setting the flash functions.
For details on the external Speedlite’s flash functions, refer to the
Speedlite’s instruction manual.
1
Select [Flash control].
 Under the [ z 1 ] tab, select [ Flash
control
], then press < 0 >.
 The Flash control screen will appear.
2
Select the desired item.
 Select the menu option to be set, then
press <
0 >.
To enable flash photography, set
[
Enable ]. To enable only the AF-assist
beam to be emitted, set [
Disable ].
For normal flash exposures, set it to
[
Evaluative ]. If [ Average ] is set, the
flash exposure will be averaged for the
entire metered scene. Depending on the
scene, flash exposure compensation
may be necessary. This setting is for
advanced users.
3 Setting the FlashN
Flash Firing
E-TTL II Metering

Canon EOS 80D Specifications

General

Sensor	APS-C CMOS
Megapixels	24.2 MP
ISO Range	100-16000 (expandable to 25600)
Continuous Shooting Speed	7 fps
Video Resolution	1080p at 60 fps
Screen	3.0-inch Vari-angle touchscreen LCD
Connectivity	Wi-Fi, NFC
Battery Life	Approx. 960 shots (CIPA)
Camera Type	DSLR
Lens Mount	Canon EF/EF-S
Battery	LP-E6N
Weight	730 g (body only)
Dimensions	139 x 105.2 x 78.5 mm
Storage Media	SD/SDHC/SDXC card
Autofocus Points	45 points
Viewfinder	Optical pentaprism, 100% coverage
Shutter Speed	1/8000 to 30 sec