Canon EOS 80D User Manual

496
If there is a problem with the camera, an
error message will appear. Follow the on-
screen instructions.
* If the error still persists, write down the error number and contact your nearest
Canon Service Center.
Error Codes
Number Error Message and Solution
01
Communications between the camera and lens is faulty. Clean the
lens contacts.
 Clean the electrical contacts on the camera and lens, use a Canon
lens, or remove and install the battery again (p.25, 26, 36).
02
Card cannot be accessed. Reinsert/change card or format card
with camera.
 Remove and insert the card again, replace the card, or format the
card (p.37, 64).
04
Cannot save images because card is full. Replace card.
 Replace the card, erase unnecessary images, or format the card
(p.37, 64, 378).
05
The built-in flash could not be raised. Turn the camera off and on
again.
 Operate the power switch (p.41).
06
Sensor cleaning could not be performed. Turn the camera off and
on again.
 Operate the power switch (p.41).
10, 20
30, 40
50, 60
70, 80
99
An error prevented shooting. Turn the camera off and on again or
re-install the battery.
 Operate the power switch, remove and install the battery again, or
use a Canon lens (p.36, 41).
Error number
Cause and countermeasures

Canon EOS 80D Specifications

General

Sensor	APS-C CMOS
Megapixels	24.2 MP
ISO Range	100-16000 (expandable to 25600)
Continuous Shooting Speed	7 fps
Video Resolution	1080p at 60 fps
Screen	3.0-inch Vari-angle touchscreen LCD
Connectivity	Wi-Fi, NFC
Battery Life	Approx. 960 shots (CIPA)
Camera Type	DSLR
Lens Mount	Canon EF/EF-S
Battery	LP-E6N
Weight	730 g (body only)
Dimensions	139 x 105.2 x 78.5 mm
Storage Media	SD/SDHC/SDXC card
Autofocus Points	45 points
Viewfinder	Optical pentaprism, 100% coverage
Shutter Speed	1/8000 to 30 sec